How To Use An Electric Screwdriver

Maybe you have had to deal with some sturdy screw that will not go straight into the components as you desired? What about a screw that would not turn out for you?

It could finish up being annoying and time-consuming. An electric screwdriver is the right solution for these kinds of problems.

When it comes to tightening or loosening screws, you will find them quite handy around the home regardless of the size & shape of the screw. However, today we will discuss how to use an electric screwdriver.

How to use an electric screwdriver (with brushes)?

• Firstly, you should attach the power cord to the screwdriver and the transformer.
• Fasten the ground ring and plug in the power cable to the back of the power socket and transformer.
• Turn on the power button and select a bit you need to use.
• Pull back the bit collar, put the bit and set free retracted collar
• Now turn the torque fitting nut to clockwise if you want to increase the torque. Also, you can turn the nut anticlockwise to decreases the torque.
• Please turn on the electric screwdriver and ensure it rotates accurately.
• Slowly press the lever to use the torque. You can put mild downward pressure on the front end of the driver.
• While the scheduled torque is reached, the screwdriver will stop.
• By turning the switch to the reverse setting, remove the electric screwdriver

How to use an electric screwdriver (without brushes):

• Attach the power cord to the screwdriver and transformer.
• Plug the power cable into the power socket and transformer.
• Check the power display on the transformer, and if you find it off, then check the on and off switch.
• Choose the bit you intended to apply and pull back the bit collar.
• Put the bit and leave the retracted collar.
• Ensure the bit fits the head of the driver.
• Rotate the torque fitting nut to fix the torque limit.
• Turn the nut clockwise to increase the torque. On the other hand, you can turn the nut anticlockwise to decrease the torque.
• Ensure the torque positioning with a torque-checking method.
• Turn on the driver to check for accurate rotation.
• Slowly press the lever to use the torque. You can put mild downward pressure on the front end of the driver.
• While the scheduled torque is reached, the screwdriver will stop.
• Turn over the switch to back to remove the screw.

Frequently Asked Questions (FAQs):

1. Can you use an electric drill as a screwdriver?

The short answer is yes; you can use an electric drill as a screwdriver. The rotation of the drill helps you to loosen and tighten the screws as a screwdriver.

2. What does an electric screwdriver do?

An electric screwdriver is a device that enables you to screw & unscrew easily. The screwdriver’s head is fitted with a bit casing, which can be magnetic or have a fast release technique. The bit casing enables you to put the bit fast that meets to the screw head.

3. How do you use a screwdriver set?

Put the screw on the driver’s head and keep both screw and head together with the fingers. Use a little pressure on the driver when turning in a clockwise way until the screw reaches the wood.

4. What voltage is an electric screwdriver?

According to research, the electric screwdriver (90%) comes with a voltage of 3.6 V.

Conclusion:

An electric screwdriver is a must-have to any homeowner or maintenance professional. Choosing the right electric screwdriver is essential to your toolbox. We hope this guide “how to use an electric screwdriver” could help the DIY enthusiasts who do not have any idea how to use them.

Leave a Comment