How To Remove Rust From Tools (7 Method)

We are all familiar with metal tools in our family works. Also, it is prevalent that when they are kept unused for long since they get rust.

What happens next, you get disgusted with it and set out for some other less essential works. However, you would remove the rust if you badly need that tool.

It is a bit troublesome to remove rust from the tools, and it may seem almost impossible. But today, we will discuss “how to remove rust from tools” successfully and effectively.

How to remove rust from metal tools?

There are plenty of tips and tricks in this matter to discuss. Let’s take a look at some methods that can help you to remove the rust from metal tools.

Method 1 (Vinegar):

One of the most proven methods for removing rusts from the tools is Vinegar. Vinegar is known as the natural cleaner for removing rusts. Let’s see how to use Vinegar to remove rust.

  • Take a small bowl and add some vinegar in it
  • Soak the tools like hand tools or knives in that vinegar solution
  • Allow them to sit overnight
  • Rove the metal tools and rub with a metal brush
  • Now was with a distilled water
  • Dry with a towel to get a rust-free tools

Method 2 (Baking Soda):

Another significant method for removing rusts from the tools is Baking Soda. Let’s see how to use Baking Soda.

  • Take a small bowl and add some baking soda powder in it
  • Add enough water into the powder to make a thick paste
  • Now use it on the rusted area of the tool
  • Allow it to sit on the device for 3 to 4 hours
  • Use a brush to remove the paste
  • Wash with clean water
  • Dry the tool with a towel.

Method 3 (Lemon Juice):

The acid on the lemon juice works as a natural cleaner to remove rust from the tool.

How to use Lemon Juice?

  • Take salt and rub the tools you need to clean
  • When the coating is finished, you need to cut a lemon
  • Squeeze the lemon and pour the juice onto the salt
  • Let the salt and lemon juice mixture on the tools for 2 hours
  • Now rub the area with a brush or a scouring pad to remove tough stains
  • Rinse the metal with clean water and dry it with a towel.

Method 4 (Potato & dish soap)

  • Take a potato and dish soap
  • Now slice the potato (in half)
  • Cover the open end of the potato with soap
  • Use the potato with soap as a rubbing pad to remove the rust
  • Rust reacts with potato and soap and fades away from the metal tools

Method 5 (Citric acid):

Citric acid plays a significant role when it comes to removing rust from a metal tool.

  • Collect Citric acid from the nearby food stores
  • Take a small bowl and add some hot water in it
  • Also, add 2 to 3 tablespoons of citric acid onto the pot with warm water
  • Soak the metal tools into the mixture
  • Let sit the tools overnight
  • Rub the rusts with a brush
  • Rinse with clean water and dry it with a towel.

Method 6 (Use oxalic acid):

You can use oxalic acid to make the metal rust-free. But before using oxalic acid, you need to use protective clothing, goggles, and rubber gloves. Let’s see how to use oxalic acid.

  • Wash the metal tool with clean water and dry it carefully
  • Take a bowl and add 25ml of oxalic acid
  • Now pour 250ml of warm water onto the container with acid
  • Submerge the item on the mixture for 20 minutes
  • Scrub with a brush and wash again with clean water
  • Dry the tool with a towel when the rust removal is completed

Method 7 (Remove rusts from tools with diesel):

  • Buy a liter of diesel from the nearby automobile store
  • Pour the diesel into a bowl
  • Soak the rusty tool on the diesel for 24 hours
  • Remove the item from the pot with diesel
  • Use a brush to rub the tool to make it clean

Conclusion:

There you have the best methods, “How to Remove Rust from Tools.” We hope after applying the methods mentioned above, you can successfully remove the rust from metal tools.

Do you use any of the methods to remove rust from metal surfaces safely? If so, then please let us know by leaving a comment below.

Leave a Comment