While working with or around electrical equipment, it is very important to work carefully and in a safe and smart way. It’s necessary to take safety precautions when working with electricity. Safety rules could help you avoid the risk of getting harmed or even becoming a victim of death. Safety must not be compromised and some ground rules should be followed first. Many electrical fires can be prevented by following some simple electrical safety tips and rules. Below are some electrical safety tips and rules everyone should know and follow. Always remember to ask a professional if you’re uncertain about the safety of an electrical outlet or machine.
Read Carefully Electrical Safety Tips and Rules:
1. Be Careful & Alerts:
Employees who are working on electrical equipment must be careful and alerts all times, recognizing the seriousness of consequences that might result from a disaster, because of the special nature of electrical work. There are many unexpected and unusual happenings that can lead to trouble in electrical work. View all electrical equipment as potentially dangerous.
2. Avoid Metallic Pencils or Rulers
Never use metallic pencils or rulers, or wear rings or metal watchbands when you’re working with electrical equipment. This rule is very difficult to remember, particularly when you are showing some electrical part pointing with the metallic pencil.
3. Don’t Keep Electronic Things Plugged in
Avoid keeping electronic things, for example, a hairdryer or a mobile phone plugged in and switched on while you are not in the same room- children tend to put these things in their mouths.
4. Work with Your One Hand
If it is safe to do so, work with just one hand and keeping your other hand at your side or in your pocket, away from all conductive material. This precaution decreases the probability of accidents that result in current passing through the chest cavity. If you ever read about current passing by the human body you will know, so remember that work with your only one hand.
5. Be Calm in a Tricky Situation
If an individual comes in contact with a live electrical conductor, don’t touch the equipment, cord or person. Turn off the power source from the circuit breaker or pull out the plug using a leather belt. Tricky situation and you should be very calm.
6. Avoid Repairing Energized Equipment
Don’t try to repairing energized equipment. Always watch that it is de-energized first by using a tester. When an electric tester touches a live or hot wire, the bulb inside the tester lights up showing that an electrical current is flowing through the respective wire. Check all the wires, the external metallic covering of the service panel and any other hanging wires with an electrical tester before you continue your work.
7. Work Under an Electrical Supervisor If You Are Working with Live Equipment
A moment of neglect can bring a lifetime of regret. Working with live equipment can be dangerous so avoid it. Troubleshooting and making connections to energized 440 volts circuits or higher should be done under the supervision of a certified Electrical Supervisor.
8. Check Your Rubber Gloves
Sufficient protective equipment must be used when working on a live circuit. Special attention should be given to rubber gloves to make sure these are good condition.
9. Keep You Working Zone Dry
Keep the working area dry to reduce the possibility of shock. Obtain dry boards to stand on if essential.
1. Wear non-conductive clothing:
Always wear proper non-conductive clothing like insulated gloves, non-conductive protective apparel and shoes with insulated soles. Don’t wear loose clothing or ties.
2. Stay away from water:
Stay away from water at all times when you’re working with electricity. Don’t touch or try repairing any electrical equipment or circuits with wet hands. It raises the conductivity of the electric current.
3. Unplugging unused appliances:
One of the simplest electrical safety tips is also one of the easiest to forget when an appliance is not in use, unplug it. Not only does this save you power by reducing any phantom drain, but however unplugging unused appliances also protects them from overheating or power surges. It’s frequently difficult to remember to unplug unused appliances, but the new generation of smart plugs offers a solution, allowing you to set power schedules for every outlet.
4. Proper Air Circulation
Without proper airflow, electrical equipment can overheat and short out and can become an electrical fire hazard. Ensure your appliances have proper air circulation and avoid running electrical equipment in enclosed cabinets. For best electrical safety, it’s also important to store flammable objects well away from all appliances and gadgets. Pay especially close attention to your gas or electric dryer, as these should be situated at least a foot from the wall to function safely.
5. Clean Your Appliances
Some appliances have exhaust fans, which can get dirty or stopped with debris and make the appliance work harder. This can shorten the life of the appliance and can cause a risk to the home because of overheating or even cause a buildup of dangerous gases that can lead to an electrical fire hazard. Cleaning exhaust fans regularly helps prevent such hazards.
6. Avoid Using Aluminum or Steel Ladder
Don’t use an aluminum or steel ladder when you are working on any receptacle at height in your home. An electrical surge will ground you and the entire electric current will pass through your body. In this situation use a bamboo, wooden or a fiberglass ladder instead.
- Always use insulated devices while you’re working.
- Never use pieces of equipment with frayed cords, damaged insulation or any broken plugs.
A secure working place is not always enough to control all potential electrical hazards. You have to be very careful when you are working with electrical equipment. A small mistake can be a cause of your lifetime regret. So you have to work safely and smartly. If you follow the above electrical safety tips and rules you will able to protect yourself from any disaster. Safety tips and rules help you to control your and others’ risk of injury or death from workplace hazards.